9.11.1 Wheels Standard
Within this section it will explain the correct procedure on removing and reinstalling all wheel variants of the Hoist (excluding the QRT System Hoist), this section will include Track Type 1, 2,3,4,5. See Section 1 for guidance on the track type profiles.
The images below refer to the Standard Wheel (Track Type 1), but the same procedure will apply to all the Wheel variants.
Removal
Step 1 – Using circlip pliers, remove the circlips from both wheels. (arrowed)
Step 2 – Remove the two Wheels from the Hoist as shown – Ensure the Spacers are situated within the Wheels.
Step 3 – From the front face of the Hoist, remove the Axel along with the other Wheels as shown.
Refitting / Replacement
Step 4 – Refitting is a reversal of the removal process noting the following points:
1. If replacing with brand new wheels, the below image is an exploded diagram of how the Wheels are fitted together along the axel. The Grey line indicates the Chassis Wall.