About Lesson
E-Stop Assembly
Within this section it will explain the correct procedure on removing and reinstalling the E-Stop Assembly for servicing procedures or replacement.
Removal
Step 1 – Remove external covers of the Hoist. (Refer to section 9.1)
Step 2 – Disconnect the Power from the PCB. (Refer to section 9.2 for guidance)
Step 3 – Remove the Batteries from the Hoist. (Refer to section 9.3)
Step 4 – Remove the four screws circled using a 2mm Allen Key.
Step 5 – Remove the E-Stop assembly from the hoist as shown.
Refitting / Replacement
Step 6 – Refitting is a reversal of the removal process.