Hoist is functioning but LED is inactive
Attempt to raise/lower Hoist with handset, the Hoist does perform commands but the LED Panel does not respond. Follow the Troubleshooting Guide below.
Troubleshooting Guide
1. Check LED externally for any impact damage, e.g. cracks or breaks.
2. Check the LED wiring for damage such as cuts or breaks. Ensure they are plugged in.
3. Inspect the PCB for any damage such as blown components.
4. Replace the External Cover Assembly.
5. Replace the PCB.
Action Guide
1. Replace the External Covers of the Hoist. See section 9.1 for guidance.
2. Plug the wires in correctly or replace the External Covers if the wires are damaged. See section 9.1 for guidance.
3. Replace the PCB. See section 9.2 for guidance.
4. See section 9.1 for guidance on External Covers replacement.
5. See section 9.2 for guidance on PCB replacement.