Installing the Trolley

The section below will cover the Installation of the Hoist Trolleys into their specified Tracks. Refer to the Table in the introduction to determine if the trolley available is compatible with the pre-installed track. Do not use a variant trolley and track together as they are incompatible.

To install the CP Trolley, follow the guidance below:

1. Complete all the relevant steps in section 4.1.

2. A step ladder is recommended for easier and safer installation.

3. Align the trolley horizontally with the Ceiling Track entrance, with the attachment hook facing downward.

4. Carefully place the Trolley into the track without damaging the component. 

5. Using the wheels, slide the Trolley away from the end of the ceiling track for safety.

6. Reverse the Steps in section 4.1 to secure the ceiling track entrance. Fitting the end stop, safety bolt and end cap correctly.

7. Trolley Installation Complete.

To remove the Trolley, follow the steps above in reverse.