Introduction

Welcome to the Mackworth CP Ceiling Track Hoist Commissioning and Decommissioning Manual, this manual includes the CP440 hoist. Here it will explain on how to successfully install the Hoist into a pre-existing ceiling track safely and securely, as well as how to remove the hoist from the track. Use the contents page for easier navigation around the manual to discover the required section. The aim of the manual is that to help and assist you, so that you can provide a successful installation and removal of the hoist for the satisfaction and safety of the customer.

The Mackworth CP is available in different configurations dependent on track profile. The track profiles are shown below:

When Commissioning the CP Hoist, one of the above track profiles should match the track the hoist is about to be installed into.

To ensure the hoist available is compatible with the pre-installed track, refer to the table below:

This following guide covers the following CP models below: