Course Content
CP440 – Service Manual
0/35
Introduction (1.0)
00:00
Safety Precautions (2.0)
00:00
Servicing (3.0)
00:00
Lift Tape Condition (3.1)
00:00
Test Procedure (4.0)
00:00
Tools, Equipment and Lubricants Required for Servicing (5.0)
00:00
Decommissioning (6.0)
00:00
Hoist Removal (6.1)
00:00
Hoist Dismantling (6.2)
00:00
Hoist Disposal (6.3)
00:00
Spare Parts List (7.0)
00:00
Troubleshooting (8.0)
00:00
Hoist doesn’t turn on (8.1)
00:00
Hoist doesn’t charge (8.2)
00:00
Hoist doesn’t lift – No error indication (8.3)
00:00
Hoist doesn’t lift – high current (8.4)
00:00
Hoist is functioning but LED is inactive (8.5)
00:00
Hoist Safety Mechanisms (8.6)
00:00
LED Fault finding table (8.7)
00:00
Servicing – Removal and Replacement (9.0)
00:00
External Covers (9.1)
00:00
PCB (9.2)
00:00
Batteries (9.3)
00:00
Lift Motor (9.4)
00:00
Bottom QRS Hook (9.5.1)
00:00
Top QRS Hook (9.5.2)
00:00
Bottom Cover (9.6.1)
00:00
Top Cover (9.6.2)
00:00
Limit Switch (9.7)
00:00
Hub (9.8)
00:00
Lift Tape (9.9)
00:00
Motor Shaft (9.10)
00:00
Trolley Wheels (9.11)
00:00
Handset Cable Port (9.12)
00:00
E-Stop Assembly (9.13)
00:00
CP440 – Commissioning Manual
0/24
Introduction (1.0)
00:00
Safety Precautions (2.0)
00:00
Required Tools and Equipment (2.1)
00:00
Hoist Unboxing (3.0)
00:00
Hoist Installation (4.0)
00:00
Ceiling Track Access (4.1)
00:00
Installing the Trolley (4.2)
00:00
Installing the Hoist onto the Trolley (4.3)
00:00
Installing the Hoist onto an FSG (4.4)
00:00
Component Attachment (5.0)
00:00
Attaching the Handset (5.1)
00:00
Attaching the Carry Bar (5.2)
00:00
Fixing the Charging System (5.3)
00:00
Hoist Start Up and Function Checks (6.0)
00:00
Turning the Hoist On and Off (6.1)
00:00
Operating Controls (6.2)
00:00
Moving the hoist along the track system (6.3)
00:00
Charging the Hoist (6.4)
00:00
LED Display (6.5)
00:00
Accessories (7.0)
00:00
Decommissioning (8.0)
00:00
Hoist Removal (8.1)
00:00
Hoist Dismantling (8.2)
00:00
Hoist Disposal (8.3)
00:00
CP440 – Spare Parts Manual
The CP440 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the CP440 ceiling track hoist. It includes a parts list, descriptions, illustrations information. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the CP440 equipment.
0/3
Track Type (1.0)
00:00
Spare Parts Summary (2.0)
00:00
Part Code Detail (3.0)
00:00
CP440 – Training Manual
0/1
CP440 - Training Manual
01:01:00
CP440 (Portable Motor)
About Lesson

Required Tools and Equipment 

When carrying out work on the Ceiling Track Hoist you will require the following:

 

Tools Required

2mm T Bar Allen wrench

2.5mm T Bar Allen wrench

3mm T Bar Allen wrench

4mm T Bar Allen wrench

5mm T Bar Allen wrench

5.5mm combination spanner

8mm combination spanner

13mm combination spanner x2

No. 2 Pozi drive screwdriver

Small slotted screwdriver

External Circlip pliers 3-10mm

Long nose pliers

Side snips

Power Drill

Drill Piece set up to 8.5mm

 

Equipment Required

Step Ladder

Marker Pen

Cloth

Lint Free Cloth

The correct documentation

Previous
Next