Tools, Equipment and Lubricants Required for Servicing
When carrying out work on the CP Hoist, you will require the following:
Tools Required
1.5mm Allen Key
2mm Allen Key
2.5mm Allen Key
3mm Allen Key
4mm Ball Ended Allen Key
5mm Allen Key
No. 2 Pozi Drive Screwdriver
Small Slotted Screwdriver
5.5mm slotted Screwdriver
External Circlip Pliers 3-10mm
Long Nose Pliers
Side Snips
Digital Vernier Calliper
Tape Measure
Second Cut Hand File
Power Drill
8.5mm Drill Piece
Equipment Required
Step Ladder
Multi-Meter
Battery Tester
Marker Pen
Cloth
Lint Free Cloth
Service Documentation
Product User Manual
Product Spare Parts Manual
Product Commissioning Manual
Test Weights – 200kg (440 lb)
Weight Trolley
Lifting Straps x2 (Attach weight to Carry Bar)
Service Stand
Grease Gun
Cable Ties – 100×2.5mm (Part No. 000106) x 4
Lubricants and Sundries Required
Morris Grease – k42EP Multi- Purpose Grease
Loctite 222
Loctite 243