About Lesson
Top Cover
Removal
Step 1 – Remove external covers of the Hoist. (Refer to section 9.1)
Step 2 – Remove the PCB from the Hoist. (Refer to section 9.2)
Step 3 – Remove the Top QRS Hook (refer to section 9.5)
Step 4 – Using Long Nose Pliers, remove the Bung that secures the Cover to the Chassis by pressing the retaining clips inwards.
Step 5 – Gently pull the Top Cover away from the Chassis.
Refitting / Replacement
Step 6 – Refitting is a reversal of the removal process noting the following point:
A. Ensure to align the Bottom Cover with the hole for the Bung
B. Attach the Bung by simply pressing the Bung into the slot.