Attaching the Carry Bar

To attach the carry bar, follow the guidance below for correct install method.
1. Position the carry bar directly below the lift tape and remove the bung and pin from the underside of the carry bar. (Figure 10-1)
2. Insert the lift tape through the carry bar by raising the carry bar through the tape. (Figure 10-2)
3. Place the pin through the loop at the end of the lift tape as shown in figure 10-3, this will secure the carry bar to the lift tape.
4. Lower the carry bar until the pin and lift tape secures the carry bar to the lift tape. (Figure 10-4)
5. Once the carry bar is secure, place the bung back into the underside of the carry bar to complete the carry bar attachment. (Figure 10-4)

To remove the carry bar, follow the above steps in reverse.