FSG440 (Portable Gantry)
About Lesson

2.0 – Safety Precautions 

 

Read and understand this manual in its entirety before installing the Free Standing Gantry.

The information in this manual is important for the safety of anyone near the Gantry and must be read and understood to help prevent injuries.

 

The FSG has been specifically designed to be installed in both the professional and home health care environments.

 

No matter the environment, health and safety factors should be considered to ensure the safety and essential performance of the Gantry and to avoid unnecessary damage or injuries to people within the area of the Gantry.

 

Typical examples include: radiated heat (e.g. from a heater or fire place), excessive moisture impacting electrical performance (e.g. from a bathroom or kitchen area) and the correct storage of the Gantry after use.

 

The Gantry is not intended to be used in environments where there are rapid changes in the environmental temperature and humidity during intended use.

 

Any commissioning or decommissioning of the Gantry that has not been carried out by an authorized Mackworth personnel will void the product warranty.

 

– Mackworth authorized personnel must be the only Technicians who Commission and Decommission the Gantry.

– Ensure that all the below procedures are followed correctly as instructed in this manual.

– The FSG has been specifically designed to be installed in both the professional and home health care environments only and is not intended to be installed elsewhere.

 

Unauthorized modifications on any Mackworth product may affect its safety. The manufacturer will not be held responsible for any accident, incident or deficiencies of performance that occur as a result of any unauthorized modification to its products.