7.2 – Track

In this section it will explain the correct procedure on removing and refitting the Track.         

Removal

Step 1 – If required, remove the End Caps from the Track. (Refer to section 7.1)

Step 2 – Loosen the two star handles to release the track from the leg post.

Step 3 – Loosen the two star handles at the opposite leg post to release the track from its fixing.

Step 4 – Raise the track from the two leg posts to remove.

Refitting / Replacement

Step 5 – Refitting is a reversal of the removal process noting the following points:

– When refitting the Track to the leg posts, ensure that the two leg posts are the track length distance apart to locate the track onto the legs.

– Ensure the two leg posts are in the same orientation.

– The track can be located in either orientation.

– Ensure to fully tighten the star handles to secure the track.