Course Content
TX600 – Training Manual
0/1
TX600 – Commissioning Manual
0/35
TX600 – Spare Parts Manual
The TX600 spare parts manual is a comprehensive guide that provides detailed information about the spare parts used in the TX600 machinery. It includes a parts list, descriptions, illustrations. It is a valuable resource for technicians and maintenance personnel to effectively repair and maintain the TX600 equipment.
0/3
Test Topic
TX600 (Fixed Motor)
About Lesson

6.4  Charging the Hoist

The TX Hoist is charged by the charging dock installed in the track. A charging dock should have been fitted during the installation of the Hoist.

To Traverse the TX600 or TX440, simply manually/powered traverse the Hoist along the track to the charging dock at the far end of the track. Or for RTC versions use the RTC function to return the hoist to the charging dock. Once the Hoist has made contact, it should begin charging immediately. The LED will begin to flash orange when charging, or if fully charged, will show a steady green. The LCD screen will display ‘charging’ or ‘charged’.

At the end of each use of the Hoist, it is recommended that it be returned to the charging dock for placement and charging. This will ensure that the batteries are charged on a regular basis for peak performance and maximum life expectancy.